01
Containerized deployment
Factory-organized equipment reduces on-site battery assembly and improves project coordination.
Project-Scale Battery Energy Storage
BESS-PLUS 500GP Containerized Storage
A 516.096kWh containerized LiFePO4 battery platform for renewable integration, microgrids, industrial backup and project-scale dispatch.
Compare this product family
- Model
- E-MATE 500GP
- Battery module
- 14.336 kWh, 51.2 V, 110 kg (242.5 lb)
- Pack quantity
- 18 × 2 = 36
1 / 6Product overview
What this product is designed to do
BESS-PLUS 500GP is a containerized LiFePO4 battery platform with 516.096kWh of listed system energy and a 921.6V nominal DC architecture. It is intended for renewable integration, microgrids, industrial backup and project-level dispatch.
The designation 500GP is retained as the model name and is not interpreted as a technical value. Final project scope may include PCS, EMS, HVAC, fire protection, switchgear and auxiliary systems; the bill of materials must be defined for each quotation.
Choose the container format when factory-organized equipment, transportable project blocks and high-voltage PCS integration suit the site plan. A smaller cabinet may be more practical where energy demand, access or foundation limits do not justify a container.
Product advantages
Advantages tied to real decisions
02
516kWh energy block
A repeatable project unit supports renewable and microgrid capacity planning.
03
High-voltage architecture
The 921.6V nominal platform is designed for project PCS integration.
Selection logic
Choose by application and system requirements
Renewable energy integration
Coordinate a repeatable storage block with solar or wind generation.
Microgrid energy dispatch
Support planned islanded or grid-connected operating strategies through PCS and EMS.
Industrial project backup
Provide project-scale stored energy for selected industrial continuity requirements.
Verified technical data
BESS-PLUS 500GP Containerized Storage technical specifications
Confirm the current datasheet, model scope and project conditions before specification or quotation.
| Electrical specification | BESS-PLUS 500GP Containerized Storage |
|---|---|
| Model | E-MATE 500GP |
| Battery module | 14.336 kWh, 51.2 V, 110 kg (242.5 lb) |
| Pack quantity | 18 × 2 = 36 |
| Cell chemistry | LFP (LiFePO4) |
| System energy | 516.096 kWh |
| Nominal voltage | 921.6 V |
| Operating voltage | 820.8–1,010.9 V |
| Output current | 140 A × 2 / 280 A × 2 |
| Display | SOC status display and LED indicators |
| Communication | Ethernet / CAN / RS485 |
| Service life | 6,000 cycles @ 80% DoD, 25°C, 0.5C, 60% EOL |
| Scalability | Yes |
| Operating modes | Grid-connected / grid-connected + standby / off-grid |
| Inverter compatibility | Major PCS brands; confirm against the compatibility list |
| Cell certifications | UN38.3 / IEC 62619 / UL 1642 |
| Battery pack certifications | UN38.3 / IEC 62619 / IEC 61000 |
| System certification | UL 9540; additional certifications available on request |
| Test condition | 100% DoD; charge/discharge at 0.2C and 25°C |
| Mechanical and environmental | BESS-PLUS 500GP Containerized Storage |
|---|---|
| Dimensions (W × D × H) | 2,991 × 2,438 × 2,591 mm (117.8 × 95.9 × 102 in) |
| Weight | 8,000 kg (17,637 lb) |
| Operating temperature | −20°C to 60°C (−4°F to 140°F) |
| Ambient humidity | ≤95% RH, non-condensing |
| Ingress protection | IP55 |
| Temperature derating | Applies from −10°C to 5°C and from 45°C to 55°C |
Compatibility and documents
Verify compatibility before ordering
- PCS across 820.8-1010.9V operating range
- EMS, cybersecurity and communications architecture
- Foundation, lifting, HVAC and fire strategy
Project fit
Where BESS-PLUS 500GP Containerized Storage fits best
Good fit
- Solar and wind projects
- Microgrids
- Industrial and utility support
Review another format
- Projects treating 500GP as a confirmed capacity definition
- Sites without transport, lifting and foundation review
- Orders without a confirmed project bill of materials
Frequently asked questions
Common questions before you choose
Is BESS-PLUS 500GP a complete turnkey system?
Final scope may include battery, PCS, EMS, fire protection, HVAC, switchgear and auxiliary systems. Confirm the bill of materials for each quotation.
What foundation is required?
A structural engineer should confirm bearing load, anchoring, drainage, cable entry and service clearances based on the 8000kg listed weight.
Can it be used with renewable generation?
Yes. Typical uses include solar and wind smoothing, microgrids and project-level energy dispatch.
What PCS voltage range is required?
The battery operating range is listed as 820.8-1010.9V. PCS compatibility must be checked across all operating conditions.
How is the system monitored?
Ethernet, CAN and RS485 are listed. EMS architecture, remote access and cybersecurity should be defined during engineering.
What information starts a project review?
Provide single-line diagrams, load/generation data, grid requirements, operating modes, site layout, climate, applicable standards and delivery constraints.
Residential Energy StorageE-STONE 5.1kWh
Compact residential storage for solar self-use and essential-load backup.
Residential Energy StorageE-STONE 16.0kWh
Higher-capacity residential storage for longer backup and daily cycling.
Residential Energy StorageE-STONE Pro 16.0kWh
Alternative residential format for projects requiring added system flexibility.
Commercial & Industrial ESSE-MATE 114R
Integrated commercial energy storage for facility and project applications.
Commercial & Industrial ESSE-WALL 200R
Commercial storage platform for flexible indoor project deployment.
Commercial & Industrial ESSBESS 200kWh
Outdoor cabinet storage for commercial facilities and distributed projects.
Lithium BatteriesPOWER PILE 5.12kWh
Stackable LiFePO4 battery module for scalable energy storage systems.
Lithium BatteriesPOWER PILE 16.0kWh
Expanded modular battery capacity for residential and commercial demand.
Off-Grid InvertersPV INV 6.2kW
Off-grid solar inverter for independent and backup power systems.
Off-Grid InvertersPV INV 11kW
Higher-power off-grid inverter for demanding residential and light-commercial loads.
Project review
Confirm the product against your actual project
Share the application, electrical platform, load, capacity, runtime and installation location.