01
11kW continuous output
Supports larger protected-load groups when the electrical design is correctly sized.
High-Power Hybrid Conversion
PV-INV 11kW Hybrid Solar Inverter
An 11kW battery inverter with dual-channel MPPT for larger homes and light-commercial solar storage systems.
Compare this product family
- AC input mode
- L + N + PE
- Rated AC input
- 220 / 230 / 240 VAC
- AC input range
- 90–280 VAC ±3 V (Normal); 170–280 VAC ±3 V (UPS)
1 / 6Product overview
What this product is designed to do
PV-INV 11kW is a higher-power 48V inverter for large homes and light-commercial solar storage. It provides 11000W battery-inverter output, dual MPPT inputs and up to 2 x 7500W of published PV input capacity.
Dual MPPT channels are useful when roof sections have different orientations or operating conditions. The higher power also creates higher battery current, cabling and protection requirements, so the complete DC design must be reviewed rather than selected from inverter power alone.
Choose this model when the load study supports an 11kW single-phase system and the PV array benefits from two MPPT channels. The 6.2kW model may be more economical for moderate residential loads.
Product advantages
Advantages tied to real decisions
02
Dual MPPT
Separates PV strings with different orientations or array conditions.
03
22kVA surge
Provides short-duration headroom for compatible motor and appliance starts.
Selection logic
Choose by application and system requirements
Large-home solar storage
Support a larger PV array and higher residential load group.
Light-commercial backup
Protect selected office, retail or workshop circuits after load review.
Dual-orientation PV
Use separate MPPT channels for differently oriented array sections.
Verified technical data
PV-INV 11kW Hybrid Solar Inverter technical specifications
Confirm the current datasheet, model scope and project conditions before specification or quotation.
| Electrical specification | PV-INV 11kW Hybrid Solar Inverter |
|---|---|
| AC input mode | L + N + PE |
| Rated AC input | 220 / 230 / 240 VAC |
| AC input range | 90–280 VAC ±3 V (Normal); 170–280 VAC ±3 V (UPS) |
| AC frequency | 50 / 60 Hz, auto-detection |
| Battery inversion power | 11,000 W |
| PV inversion power | 12,000 W |
| AC output | 220 / 230 / 240 VAC ±5% |
| Output frequency | 50 / 60 Hz ±0.1% |
| Output waveform | Pure sine wave |
| Transfer time | 10 ms (computer); 20 ms (household appliance) |
| Peak power | 22,000 VA |
| Overload capability | 11 s @ 105–150%; 2 s @ 150–200%; 400 ms @ >200% |
| Grid-feed voltage | 170–265 VAC |
| Grid-feed frequency | 49–51 Hz / 59–61 Hz |
| Nominal output current | 47.8 A |
| Power factor | >0.99 |
| Maximum efficiency | 98% |
| Rated battery voltage | 48 VDC |
| Constant charging voltage | 56.4 VDC |
| Float charging voltage | 54 VDC |
| MPPT configuration | Dual MPPT |
| Maximum PV input power | 2 × 7,500 W |
| MPPT range | 90–500 VDC |
| Optimal Vmp range | 360–430 VDC |
| Maximum PV voltage | 500 VDC |
| Maximum PV input current | 27 A / 27 A |
| Maximum PV charging current | 150 A |
| Maximum mains charging current | 150 A |
| Maximum total charging current | 150 A |
| Communication and expansion | RS232; optional BMS card, Wi-Fi card and dry contact |
| Parallel operation | Supported in grid mode |
| Mechanical and environmental | PV-INV 11kW Hybrid Solar Inverter |
|---|---|
| Operating temperature | −10°C to 50°C |
| Relative humidity | 20–95%, non-condensing |
| Noise | ≤50 dB |
| Altitude | ≤1,000 m without derating; maximum 4,000 m |
| Dimensions | 550 × 470 × 145 mm |
Compatibility and documents
Verify compatibility before ordering
- 48V high-current battery system
- Dual-MPPT string design
- AC cable, breaker and surge-load review
Project fit
Where PV-INV 11kW Hybrid Solar Inverter fits best
Good fit
- Large homes
- Light commercial loads
- Dual-MPPT PV arrays
Review another format
- Small systems where 6.2kW is already sufficient
- Battery banks unable to supply high 48V current
- Three-phase projects without a confirmed system architecture
Frequently asked questions
Common questions before you choose
What projects suit the 11kW model?
It is intended for larger residential and light-commercial systems with higher loads and larger PV arrays.
Does it use a high-voltage battery?
No. The brochure lists a 48Vdc battery platform.
What does dual MPPT mean?
Two independent MPPT channels allow separate PV strings to be optimized within their voltage and current limits.
Can it run motors or pumps?
The 22kVA peak rating provides surge headroom, but motor starting current and duration must be checked before selection.
Can units operate in parallel?
The brochure lists a parallel operation interface. Confirm the supported quantity, firmware and wiring method for the project.
Which battery should be paired with it?
Select a 48V battery system that can supply the required current and supports the approved communication protocol.
Residential Energy StorageE-STONE 5.1kWh
Compact residential storage for solar self-use and essential-load backup.
Residential Energy StorageE-STONE 16.0kWh
Higher-capacity residential storage for longer backup and daily cycling.
Residential Energy StorageE-STONE Pro 16.0kWh
Alternative residential format for projects requiring added system flexibility.
Commercial & Industrial ESSE-MATE 114R
Integrated commercial energy storage for facility and project applications.
Commercial & Industrial ESSE-WALL 200R
Commercial storage platform for flexible indoor project deployment.
Commercial & Industrial ESSBESS 200kWh
Outdoor cabinet storage for commercial facilities and distributed projects.
Commercial & Industrial ESSBESS Plus 500GP
Project-scale storage platform for higher-capacity commercial applications.
Lithium BatteriesPOWER PILE 5.12kWh
Stackable LiFePO4 battery module for scalable energy storage systems.
Lithium BatteriesPOWER PILE 16.0kWh
Expanded modular battery capacity for residential and commercial demand.
Off-Grid InvertersPV INV 6.2kW
Off-grid solar inverter for independent and backup power systems.
Project review
Confirm the product against your actual project
Share the application, electrical platform, load, capacity, runtime and installation location.