01
Standardized module
A repeatable battery block simplifies cabinet planning and staged expansion.
Modular Rack Battery
POWER PILE 5.12kWh Rack Battery
A 51.2V rack-format battery module for cabinet integration, off-grid systems and storage projects that need serviceable, repeatable capacity blocks.
Compare this product family
- Cell chemistry
- LFP (LiFePO4)
- Energy
- 5.12 kWh
- Nominal voltage
- 51.2 V
1 / 6Product overview
What this product is designed to do
POWER PILE 5.12 is a 51.2V rack-format LiFePO4 battery module for integrators who prefer repeatable capacity blocks, organized cabinet installation and front-access service. It is not positioned as a decorative living-space battery.
The module can support residential technical rooms, remote solar systems and small commercial cabinets when rack dimensions, ventilation, DC protection and inverter communication are planned together. Up to 15 connections are listed, subject to inverter and protection limits.
Choose this model for phased expansion and serviceable cabinet layouts. Choose an E-STONE enclosure when a finished home-facing appearance is more important than rack modularity.
Product advantages
Advantages tied to real decisions
02
Front-service approach
Rack integration keeps connections and service access organized.
03
Protocol flexibility
CAN, RS485 and RS232 support system-level communication.
Selection logic
Choose by application and system requirements
Modular cabinet storage
Build capacity from standardized 5.12kWh modules in a planned rack.
Remote solar system
Combine serviceable batteries with a compatible off-grid inverter.
Phased expansion
Add capacity within the approved parallel and protection design.
Verified technical data
POWER PILE 5.12kWh Rack Battery technical specifications
Confirm the current datasheet, model scope and project conditions before specification or quotation.
| Electrical specification | POWER PILE 5.12kWh Rack Battery |
|---|---|
| Cell chemistry | LFP (LiFePO4) |
| Energy | 5.12 kWh |
| Nominal voltage | 51.2 V |
| Operating voltage | 45.6–56.16 V |
| Output current | 100 A / 50 A |
| BMS protection current | 110 A, 1 s |
| Communication | CAN / RS485 / RS232 |
| Cell certifications | UN38.3 / IEC 62619 / UL 1642 |
| Battery pack certifications | UN38.3 / IEC 62619 / IEC 61000 / UKCA |
| Included parts | Battery, PCS cable and parallel cable |
| Display | SOC status display and LED indicators |
| Cycle life | 6,000 cycles @ 80% DoD, 25°C, 0.5C, 60% EOL |
| Parallel support | Up to 15 units |
| Operating modes | Grid-connected / grid-connected + standby / off-grid |
| Inverter compatibility | Major PCS brands; confirm against the compatibility list |
| Test condition | 100% DoD; charge/discharge at 0.2C and 25°C |
| Mechanical and environmental | POWER PILE 5.12kWh Rack Battery |
|---|---|
| Dimensions (W × D × H) | 440 × 550 × 130 mm (17.3 × 21.6 × 5.12 in) |
| Weight | 45 kg (99 lb) |
| Installation | Wall-mounted or floor-mounted |
| Ingress protection | IP20 |
| Operating temperature | −20°C to 60°C |
| Ambient humidity | ≤95% RH |
| Temperature derating | Applies from −10°C to 5°C and from 45°C to 55°C |
Compatibility and documents
Verify compatibility before ordering
- Rack dimensions and load capacity
- 51.2V inverter and approved protocol
- Ventilation, DC isolation and overcurrent protection
Project fit
Where POWER PILE 5.12kWh Rack Battery fits best
Good fit
- Rack and cabinet systems
- Remote solar sites
- Incremental capacity growth
Review another format
- Exposed installation without a protected cabinet
- Projects without rack ventilation and DC protection planning
- Customers wanting a finished living-space enclosure
Frequently asked questions
Common questions before you choose
Is POWER PILE 5.12 supplied with a cabinet?
The module can be integrated into a suitable rack or cabinet. Confirm whether the project requires modules only or a complete cabinet assembly.
How many modules can be used?
The brochure lists support for up to 15 parallel connections; system voltage, inverter limits and protection design must also be checked.
Can it be used in a home?
Yes, particularly where a technical room or battery cabinet is available. For visible living-space installations, E-STONE may be more appropriate.
What communication is available?
CAN, RS485 and RS232 are listed for BMS and inverter integration.
Is the module outdoor rated?
No. The listed protection class is IP20, so it requires a protected cabinet or indoor environment.
What should an integrator confirm?
Confirm rack dimensions, ventilation, cable sizing, DC protection, inverter protocol, module quantity and maintenance clearance.
Residential Energy StorageE-STONE 5.1kWh
Compact residential storage for solar self-use and essential-load backup.
Residential Energy StorageE-STONE 16.0kWh
Higher-capacity residential storage for longer backup and daily cycling.
Residential Energy StorageE-STONE Pro 16.0kWh
Alternative residential format for projects requiring added system flexibility.
Commercial & Industrial ESSE-MATE 114R
Integrated commercial energy storage for facility and project applications.
Commercial & Industrial ESSE-WALL 200R
Commercial storage platform for flexible indoor project deployment.
Commercial & Industrial ESSBESS 200kWh
Outdoor cabinet storage for commercial facilities and distributed projects.
Commercial & Industrial ESSBESS Plus 500GP
Project-scale storage platform for higher-capacity commercial applications.
Lithium BatteriesPOWER PILE 16.0kWh
Expanded modular battery capacity for residential and commercial demand.
Off-Grid InvertersPV INV 6.2kW
Off-grid solar inverter for independent and backup power systems.
Off-Grid InvertersPV INV 11kW
Higher-power off-grid inverter for demanding residential and light-commercial loads.
Project review
Confirm the product against your actual project
Share the application, electrical platform, load, capacity, runtime and installation location.